IBM eServer xSeries 226 Type 8648 Option Installation Manual page 52

Complete the following steps to replace a hot-swap power supply:
1. Review the safety information beginning on page v and "Installation guidelines"
2. Press the orange release lever on the selected power supply; then, pull the
3. Make sure the power-supply handle is in the open position; then, slide the
4. If the server is not on, turn on the server.
40
xSeries 226 Type 8648: Option Installation Guide
on page 7.
power supply out of the bay and set it aside.
Power supply
Handle
(open position)
power supply all the way into the chassis before placing the power-supply
handle into the locked position.
AC power
LED (green)
DC power
LED (green)