IBM eServer xSeries 226 Type 8648 Option Installation Manual page 50

10. Connect all external cables; then, connect the power cords.
11. Turn on the server.
12. Start the Configuration/Setup Utility program and set configuration parameters
38
xSeries 226 Type 8648: Option Installation Guide
b. Press the battery down into the socket until it clicks into place. Make sure
the battery clip holds the battery securely.
9. Replace the frame-support bracket and side cover. (See "Removing and
installing the support bracket" on page 12 and "Replacing the side cover" on
page 41).
as needed. See the User's Guide on the IBM xSeries Documentation CD.