IBM eServer xSeries 226 Type 8648 Option Installation Manual page 38

v For additional illustrations of the system-board components, see "System-board
The following illustration shows how to install an additional microprocessor.
Complete the following steps to install a microprocessor:
26
xSeries 226 Type 8648: Option Installation Guide
option connectors" on page 6.
Heat-sink
release levers
Microprocessor 2
Heat sink 2 Heat sink 2
1. Read the safety information beginning on page v and "Installation guidelines"
on page 7.
2. Turn off the server and peripheral devices, and disconnect the power cords
and all external cables.
3. Remove the side cover. See "Removing the side cover" on page 10.
4. Remove the support bracket. See "Removing and installing the support
bracket" on page 12.
5. Open the microprocessor air baffle. See "Opening and closing the
microprocessor air baffle" on page 12.
6. Remove the microprocessor baffle assembly from the second microprocessor
socket.
Retainer spring
DIMMs
Microprocessor
baffle assembly
Microprocessor
air baffle
VRM