Brother MFC-J2510 Basic User's Manual page 37

Loading Photo and Photo L paper
a
Before loading, press the corners and
sides of the Photo and Photo L paper to
make them as flat as possible.
IMPORTANT
If Photo (10  15 cm) or Photo L
(89  127 mm) paper is "double-feeding,"
put one piece of the Photo paper in the
tray at a time.
b
Do one of the following:
If you put Photo L (89  127 mm) in

the paper tray, lift up the Photo L
stopper (1).
If you put Photo (10  15 cm) in the

paper tray, lift up the Photo
stopper (2).
Gently press and slide the paper
guides (3) to fit the paper size.
2
3
c
Close the output paper tray cover.
d
2
e
f
3
1
g
Put Photo or Photo L paper in the paper
tray print side down.
Open the output paper tray cover (1).
1
Gently adjust the paper guides (1) to fit
the paper.
Make sure the paper guides touch the
sides of the paper.
1
Close the output paper tray cover.
Loading paper
2
27