First Alert ReadyGuard Touch User Manual page 54

USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
Automation
Ready To Arm
1
4
Enter Time
10:21 AM
7
AM / PM
Clear
Editing a Scheduled Function
Ready To Arm
Schedule 1 Auto Arm
Auto Stay Daily
Edit Add New
Deleting a Scheduled Function
Ready To Arm
Schedule 1 Auto Arm
Auto Stay Daily
Edit Add New
9. If Auto Stay is selected, select "Clear" then
2 3
6
5
10. Select "Rules" then select a Rule from the
9
8
11. Enter a Start Time and End Time on the
Done
0
12. Select the " " button. The system returns to
5000-100-147-V0
1. At
2. Select the "Edit" button. The Schedule
Delete
5100-100-081-V0
1. At
2. Select the "Delete" button. A confirmation
3. Select the " " button. The system returns
Delete
5100-100-081-V0
– 54 –
enter a 4-digit time on the displayed keypad
then select "Save". If "Rules" is selected
proceed to Step 11. If "Disarm Notification"
is selected proceed to Step 12.
displayed list (Rules 1 through Rules 20).
displayed keypad then select "Save".
the Automation programming screen.
the Schedules
Schedule you wish to edit.
Note: Rules 21-40 are only accessible through
TotalConnect Service.
programming screen will appear. Follow the
steps as noted above in the programming a
Scheduled Function section to edit and
save your changes.
the Schedules
Schedule you wish to delete.
Note: Rules 21-40 are only accessible through
TotalConnect Service.
screen will be displayed. Select "Yes" to
confirm the deletion.
to the Automation programming screen.
screen, select the
screen, select the