Carpet Height Adjustment - Hoover Vacuum Cleaner Owner's Manual

Polarized
plug
To reduce the risk
of electric shock,
this appliance has
a polarized plug
(one blade is wider
than the other).
This plug will fit in
a polarized outlet
only one way.
If the plug does
not fit fully in the
outlet, reverse the
plug. If it still does
not fit, contact a
qualified electrician
to install the proper
outlet. Do not
change the plug in
any way.
Transporting
cleaner
2.4
Put handle in up-
right position. Tilt
cleaner back on rear
wheels. Push
forward.
Settings
2.7
On-Off
switch
2.2
A
Plug cord into elec-
trical outlet.
To turn cleaner
ON, push switch
(A) toward front of
cleaner.
To turn cleaner
OFF, push toward
back of cleaner.
Carrying
handle
2.5
Use the carrying
handle to lift the
cleaner.
For maximum cleaning performance,
the following carpet height settings are recommended.
• Low setting: for all types of carpet and hard floors.
Note: If the cleaner is difficult to push, rotate knob to the next higher
setting.
• Medium and High settings: for deeper pile carpet where easier
pushing effort is desired, while maintaining good cleaning perfor-
mance.
Handle positions
2.3
Carpet height
adjustment
2.6
B
6
The handle of your
cleaner has three po-
sitions; upright when
using cleaning tools;
operating position for
general operation on
carpet and floors; low
for reaching under
low furniture. Step on
handle release pedal
to lower handle.
The cleaning of carpet
and rugs takes place at
the nozzle (A).
When it is necessary
to raise and lower the
nozzle for various car-
pet pile heights, turn
the carpet height ad-
A
justment knob (B) to
the desired setting.
For ease in turning
the knob, place handle
in upright position
and tilt cleaner back
slightly.