How To Use; Vacuum Description; On-Off Switch; Cord Release - Hoover uh71120 Owner's Manual

VACUUM DESCRIPTION

1. Handle
2. Dirt Cup Release Button
3. Carry Handle
4. System Check Indicator
5. Rinsable Filter Access
6. Dirt Cup
7. Exhaust Filter
8. Height Adjustment
9. Furniture Guard
10. Pet Upholstery Tool/Pet Stair Tool*
11. Extension Wand
12. Crevice Tool (inside wand)*
13. Handle Release Pedal
14. Hose
15. Dusting Brush*/Pet Turbo Tool*
16. ON/OFF Switch
17. Hose Release Button
18. Hose Connecting Tube
*Varies per model.

ON-OFF SWITCH

2.2
A

CARPET HEIGHT ADJUSTMENT*

2.3
*Number of height settings vary per model.
Always store vacuum with the power cord secured around the two cord hooks.
Actual model may vary from images shown.

2. HOW TO USE

2.1
2
3
4
5
6
7
8
9
2.2 Plug cord into electrical
outlet.
To turn vacuum ON (I=0N),
push ON/OFF switch (A) to
ON position.
To turn vacuum OFF (O=OFF),
push switch to OFF position.
C
IMPORTANT
1
10
11
12
WARNING
!
Use extra care when cleaning on stairs. To avoid
personal injury or damage, and to prevent the cleaner
from falling, always place cleaner at bottom of stairs
on floor. Do not place cleaner on stairs or furniture, as
it may result in injury or damage.
2.3 To adjust height setting, PUSH DOWN and TURN knob (C)
to desired height setting.
For maximum cleaning performance, the following carpet
height settings are recommended:
• Hard floor setting: for use on hard floors only.
• Low through High settings: Adjust depending on
carpet type.
• For high pile carpet, use high carpet setting to ease
pushing effort.
IMPORTANT
If the vacuum is difficult to push, push down and turn
knob to the next higher setting.
6
13
!
14
15
16
17
18