Table of Contents
Advertisement
Chapter 7
Configuring RADIUS Servers
Beginning in privileged EXEC mode, follow these steps to specify WISPr RADIUS attributes on the
access point:
Command
Step 1
configure terminal
Step 2
snmp-server location location
Step 3
dot11 location isocc ISO-country-code cc country-code
ac area-code
Step 4
end
Step 5
show running-config
Step 6
copy running-config startup-config
This example shows how to configure the WISPr location-name attribute:
router# snmp-server location ACMEWISP,Gate_14_Terminal_C_of_Newark_Airport
This example shows how to configure the ISO and ITU location codes on the access point:
router# dot11 location isocc us cc 1 ac 408
This example shows how the access point adds the SSID used by the client device and formats the
location-ID string:
isocc=us,cc=1,ac=408,network=ACMEWISP_NewarkAirport
Displaying the RADIUS Configuration
To display the RADIUS configuration, use the show running-config privileged EXEC command.
Note
When DNS is configured on the access point, the show running-config command sometimes displays a
server's IP address instead of its name.
OL-6415-04
Purpose
Enter global configuration mode.
Specify the WISPr location-name attribute. The
WISPr Best Current Practices for Wireless Internet
Service Provider (WISP) Roaming document
recommends that you enter the location name in this
format:
hotspot_operator_name,location
Specify ISO and ITU country and area codes that the
access point includes in accounting and
authentication requests.
isocc ISO-country-code—specifies the ISO
•
country code that the access point includes in
RADIUS authentication and accounting requests
•
cc country-code—specifies the ITU country code
that the access point includes in RADIUS
authentication and accounting requests
ac area-code—specifies the ITU area code that
•
the access point includes in RADIUS
authentication and accounting requests
Return to privileged EXEC mode.
Verify your settings.
(Optional) Save your entries in the configuration file.
Cisco Wireless ISR and HWIC Access Point Configuration Guide
Configuring and Enabling RADIUS
7-17
Advertisement
Table of Contents
