Table of Contents
Advertisement
Configuring RADIUS Servers
This chapter describes how to enable and configure the Remote Authentication Dial-In User Service
(RADIUS), that provides detailed accounting information and flexible administrative control over
authentication and authorization processes. RADIUS is facilitated through AAA and can be enabled only
through AAA commands.
You can configure your access point as a local authenticator to provide a backup for your main server or
Note
to provide authentication service on a network without a RADIUS server. See
Authentication Types,"
For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Note
Security Command Reference for Release 12.2.
OL-6415-04
for detailed instructions on configuring your access point as a local authenticator.
Cisco Wireless ISR and HWIC Access Point Configuration Guide
C H A P T E R
Chapter 6, "Configuring
7
7-1
Advertisement
Table of Contents
