Table of Contents
Advertisement
Chapter 7
Configuring RADIUS Servers
Command
Step 1
configure terminal
Step 2
radius-server vsa send [accounting |
authentication]
Step 3
end
Step 4
show running-config
Step 5
copy running-config startup-config
For a complete list of RADIUS attributes or more information about VSA 26, refer to the "RADIUS
Attributes" appendix in the Cisco IOS Security Configuration Guide for Release 12.2.
Configuring the Access Point for Vendor-Proprietary RADIUS Server Communication
Although an IETF draft standard for RADIUS specifies a method for communicating vendor-proprietary
information between the access point and the RADIUS server, some vendors have extended the RADIUS
attribute set in a unique way. Cisco IOS software supports a subset of vendor-proprietary RADIUS
attributes.
As mentioned earlier, to configure RADIUS (whether vendor-proprietary or IETF draft-compliant), you
must specify the host running the RADIUS server daemon and the secret text string it shares with the
access point. You specify the RADIUS host and secret text string by using the radius-server global
configuration commands.
Beginning in privileged EXEC mode, follow these steps to specify a vendor-proprietary RADIUS server
host and a shared secret text string:
Command
Step 1
configure terminal
Step 2
radius-server host {hostname | ip-address} non-standard
OL-6415-04
Purpose
Enter global configuration mode.
Enable the access point to recognize and use VSAs as defined by RADIUS
IETF attribute 26.
•
(Optional) Use the accounting keyword to limit the set of recognized
vendor-specific attributes to only accounting attributes.
(Optional) Use the authentication keyword to limit the set of
•
recognized vendor-specific attributes to only authentication attributes.
If you enter this command without keywords, both accounting and
authentication vendor-specific attributes are used.
Return to privileged EXEC mode.
Verify your settings.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Specify the IP address or host name of the remote
RADIUS server host and identify that it is using a
vendor-proprietary implementation of RADIUS.
Cisco Wireless ISR and HWIC Access Point Configuration Guide
Configuring and Enabling RADIUS
7-15
Advertisement
Table of Contents
