Installation; Inserting The Standard Battery; Inserting The Power Battery - Aastra 610d User Manual

Installation

Installation

Inserting the standard battery

Aastra 610d, 620d
Push the battery cover downwards until it disengages
from the locking mechanism and lift off. Insert the bat-
tery with the contacts downwards. Replace the battery
cover and push upwards until it snaps into place.
Aastra 630d
Undo the two screws on the back of the handset with a
suitable tool (e. g. coin) and remove the cover. Insert
the battery with the contacts downwards, close the
battery compartment with the cover and screw back in
place. Do not damage the rubber seal when assem-
bling.

Inserting the power battery

You can order a battery with higher capacity
(power battery) for the Aastra 620d and 630d
as an accessory (see page 67).
This battery has a thicker design so you need another
battery cover that protrudes approx. 6 mm beyond the
rear of the device.
Install the new battery cover as described above.
In the Aastra 620d you should remove any installed
fixing bracket beforehand.
5