IBM Enterprise Console Manual page 54

because access of them is direct. Event definition content and syntax are described
in the IBM Tivoli Enterprise Console Rule Builder's Guide.
$ADAPTER_HOST
$ALERT_OPTION
$DATE
$DATA_CCSID_CONVERT_STATUS
$DATA_CCSID_RETURNED
$HOSTNAME
42
IBM Tivoli Enterprise Console: Adapters Guide
The protocol address of the host where the adapter is running.
If and when an SNA alert is created and sent for the message. If a
message is received, the value is one of the following:
*DEFER
An alert is sent after local problem analysis.
*IMMED
An alert is sent immediately when the message is sent to
the QHST message queue.
*NO No alert is sent.
*UNATTEND
An alert is sent immediately when the system is running in
unattended mode (when the value of the alert status
network attribute, ALRSTS, is *UNATTEND).
The date and time the event was generated.
The following are possible values returned:
0 No conversion was needed because the CCSID of the
replacement data or impromptu message text matched the
CCSID you wanted the data or text converted to.
1 No conversion occurred because either the data was 65535
or the CCSID you wanted the data converted to was 65535.
2 No conversion occurred because you did not supply
enough space for the data.
3 The data was converted to the CCSID specified using the
best fit conversion tables.
4 A conversion error occurred using the best fit conversion
tables, so a default conversion was attempted. This
completed without error.
An error occurred on both the best fit and default
–1
conversions. The data was not converted.
The CCSID of the replacement data or impromptu message text is
returned. If an impromptu message is received, this is the CCSID
of the impromptu message text. When replacement data is
received, this is the CCSID of the replacement data fields defined
as convertible character (*CCHAR) in the message description. All
other replacement data is not converted before it is returned. If a
conversion error occurs or the CCSID you requested the data to be
converted to is 65535, the CCSID of the data or text is returned. If
replacement data is being returned and there is no *CCHAR
replacement data, 65535 is returned. Otherwise, the CCSID you
wanted the data converted to is returned.
The name of the system on which the event occurred.