Event Buffer Filter Examples; Baroc File; Example - IBM Enterprise Console Manual

v To discard specific events:
v To cache all events (the default behavior):
Note: All events are discarded when the configuration is as follows:
Event Buffer Filter Examples: The following table shows some event buffer filter
examples for a few different adapters:

BAROC File

Each adapter comes with a BAROC file describing the classes of events the adapter
supports. This file is not used by the adapter itself, but serves as a mandatory link
between the adapter and the event server. The event server must load this file
before it is able to understand events received from the adapter. A BAROC file has
an extension of .baroc; see each specific adapter chapter for exact file names. The
format of a BAROC file is described in the IBM Tivoli Enterprise Console Rule
Builder's Guide.

Example

The following fragment shows how an event class for reporting SNMP
authentication problems could be defined in a BAROC file:
16
IBM Tivoli Enterprise Console: Adapters Guide
3. Create Filter and FilterCache statements to match the specific events that
you want cached.
1. Set FilterMode to OUT.
2. Create Filter and FilterCache statements to match the specific events that
you want discarded.
1. Set FilterMode to OUT.
2. Set BufferEvents to YES.
3. Do not specify any FilterCache statements.
1. FilterMode is set to IN.
2. No FilterCache statements are specified.
Adapter Example
AS/400 Alert The following entry matches all events of the
SNA_Equipment_Malfunction class from the origin 1.2.3.4:
UNIX Log The following entry matches all events of the Su_Success class from the
File origin 126.32.2.14:
OpenView The following entry matches all events of the OV_Message class from the
origin 126.32.2.14:
Windows NT The following entry matches all events of the NT_Power_Failure class from
the origin 126.32.2.14: