These are denoted in the tecad_snmp.cds file as follows:
You would add the following entry to the tecad_snmp.cds file to map the trap
variables to adapter variables:
These variable values are then mapped to event attributes defined in the
tecad_snmp.baroc file. For example, the BAROC class definition for the
lanalertFSA-NW3-s1 event is as follows:
Object Identifier File Changes
The entry in the tecad_snmp.oid file for this trap is composed of the enterprise
prefix plus the appropriate object identifiers (OID) plus the variable attribute OID.
For example,
Troubleshooting the SNMP Adapter
1. Use the following command to cold start the SNMP adapter:
tecad_snmp [–d] [–c configuration_file]
The following are the arguments for the tecad_snmp command:
Chapter 7. SNMP Adapter
93