Troubleshooting The Openview Adapter - IBM Enterprise Console Manual

50790402
50790403
50790404
50790405
50790406
50790407
50790408
50790409
50790410
50790411
50790412
50790418
50790419
50790420
50790421
All OpenView events are supported by the OpenView adapter.

Troubleshooting the OpenView Adapter

Perform the following steps to troubleshoot the OpenView adapter:
1. Make sure that the tecad_hpov.lrf entry is correct and has been registered with
2. If the adapter does not start, look for errors in the .lrf, .oid, and .cds files.
3. If the adapter stops unexpectedly, look for data that is not valid being passed
4. Change all /dev/null entries in the .err file to the file name you want. Stop and
5. Look in /tmp/hpov_start.err for possible startup errors from the tecad_hpov.sh
Segment Marginal
Network Normal
Network Marginal
Segment Added
Segment Deleted
Network Added
Network Deleted
Connection Added
Connection Deleted
Change Polling Period
Forced Poll
Manage Node
Unmanage Node
Manage Segment
Unmanage Segment
OpenView using the ovaddobj command.
in a trap or functions. For example, PREFIX is called on a list of strings value
instead of a string value.
restart the adapter, send an event through, and then look in the trace file to see
what processing was done on the event.
script.
Chapter 5. OpenView Adapter
77