Strtecadp - IBM Enterprise Console Manual

STRTECADP

Starts an AS/400 adapter.
Flags
STRTECADP EVTADP(name) CFGFILE(filename)
Comments
The AS/400 adapters run as a batch job. The STRTECADP command starts an
AS/400 adapter.
Authorization
QSYSOPR
PUBLIC
To grant other users authority to this command, use the following commands on
the AS/400:
Arguments:
EVTADP(name)
CFGFILE(filename)
Examples
The following command starts an AS/400 message adapter using the default
configuration file. The default configuration file monitors the system operator
message queue, QSYSOPR:
The following command starts the AS/400 message adapter with the
/QSYS.LIB/MYLIB.LIB/MYFILE.FILE/MYCFG.MBR configuration file. The
configuration file could be set up to monitor an application specific message
queue:
46
IBM Tivoli Enterprise Console: Adapters Guide
*USE
*EXCLUDE
Specifies a name for the adapter being started. This name is used
on the End TEC Adapter (ENDTECADP) AS/400 command. It can
be any valid AS/400 job name; however, each adapter running on
the AS/400 system must have a unique name.
Specifies the full path name of the configuration file, in IFS format,
to be used.