Tips For Troubleshooting - IBM WebSphere Business Integration Adapter User Manual

Tracing Level
Level 5

Tips for troubleshooting

Use the following tips for troubleshooting problems:
v If the CIS agent is running remotely, try to ping the remote machine and also
v Check the CIS agent service.
v Check that the adapters are running.
v Be sure the business object structure is consistent with the operation.
v See if any default value is set for the instance ID like in the metaobjects.
v If you want to run the connector in request process mode only, be sure you start
Tracing Messages
v Messages that indicate connector initialization, for example,
messages showing the value of each configuration property
retrieved from the integration broker.
v Messages that comprise a business object dump. At this trace
level, the connector outputs a textual representation of the
business object it is processing before it begins processing the
object (showing the object the connector receives from the
collaboration), and after it is done processing the object (showing
the object the connector returns to the collaboration).
ping this machine from the remote machine.
the connector with the -fno option set.
Chapter 5. Troubleshooting and error handling
31