IBM WebSphere Business Integration Adapter User Manual page 47

Property Name
SynchronousRequestQueue
"SynchronousResponseQueue" on
page 52
SynchronousRequestTimeout
"WireFormat" on page 53
AdminInQueue
The queue that is used by the integration broker to send administrative messages
to the connector.
The default value is CONNECTORNAME/ADMININQUEUE.
AdminOutQueue
The queue that is used by the connector to send administrative messages to the
integration broker.
The default value is CONNECTORNAME/ADMINOUTQUEUE.
AgentConnections
The AgentConnections property controls the number of IIOP connections opened
for request transport between an application-specific component and its connector
controller. By default, the value of this property is set to 1, which causes
InterChange Server to open a single IIOP connection.
This property enhances performance for a multi-threaded connector by allowing
multiple connections between the connector controller and application-specific
component. When there is a large request/response workload for a particular
connection, the IBM WebSphere administrator can increase this value to enhance
performance. Recommended values are in the range of 2 to 4. Increasing the value
of this property increases the scalability of the Visigenic software, which establishes
the IIOP connections. You must restart the application-specific component and the
server for a change in property value to take effect.
Important: If a connector is single-threaded, it cannot take advantage of the
AgentTraceLevel
Level of trace messages for the application-specific component. The default is 0.
The connector delivers all trace messages applicable at the tracing level set or
lower.
Possible Default
values value
CONNECTORNAME/
SYNCHRONOUSREQUESTQUEUE
CONNECTORNAME/
SYNCHRONOUSRESPONSEQUEUE
0
CwXML, CwBO cwxml
multiple connections. Increasing the value of this property causes the
request transport to bottleneck at the application-specific component.
To determine whether a specific connector is single- or multi-threaded,
see the installing and configuring chapter of its adapter guide.
Appendix A. Standard configuration properties for connectors
Update Notes
method
component
restart
component
restart
component
restart
agent restart CwXML for
non-ICS broker;
CwBO if
Repository
Directory is
<REMOTE>
37