Checking the radio signal reception
To check result of previous radio reception time
update:
1. Ensure that the crown is in position
2. Press and release the button (A).
The second hand moves and indicates the
0
1
2
reception result.
• The relationships between the second hand
Button (A)
positions and the reception results are shown
on the next page.
3. Press and release the button (A) to exit.
The watch will resume normal operation.
• The watch will resume normal operation
automatically after 10 seconds even without
pressing the button.
14
Modes supporting this function:
[LAX] [DEN] [CHI] [NYC] [LON]
.
0
● Second hand positions and reception results
NO: Reception failed.
• To attempt reception again,
use the manual reception function.
→ from page 22
* "H", "M", and "L" indicates radio signal strength. They do not relate to the reception
performance of the watch.
* If you change the city shown after radio reception, the indication will reflect "NO".
Checking the radio signal reception
H: Radio reception and time
updating was successful
with high signal strength.
M: Radio reception time
updating was successful with
medium signal strength .
L: Radio reception
time updating was
successful with low
signal strength.
15