Checking The Power Reserve - Citizen E650 User Manual

Checking the power reserve

Check the power reserve level as follows:
1. Ensure that the crown is in position
2. Press and release the lower right button (A).
The function hand and the 2:00 sub dial
indicates the charge level (refer to table on
page 13)
0 1 2
3. Press and release the lower right button (A)
Button (A)
to exit power reserve checking.
The watch will resume normal operation.
• The watch will resume normal operation
automatically after 10 seconds even without
pressing and releasing.
12
Modes supporting this function:
[LAX] [DEN] [CHI] [NYC] [LON] [A-TM]
.
0
Charge level Level 0
Charge
indicator
(function
hand) position
Estimated
remaining Approx. 3 days
3 to 30 days
time to stop
The charge level The charge level
is insufficient. is not sufficient.
Remark Charge the battery Charge the battery
immediately. wherever possible.
Note: the power reserve indicator does not move in a "smooth" linear fashion.
It will "jump" levels based on reserve power level.
Checking the power reserve
Level 1 Level 2 Level 3
Approx. Approx. Approx.
30 to 220 days 220 to 310 days
The charge level The watch is fully
is good. Use the charged. Use the
watch without watch without
worrying about worrying about
the charge level. the charge level.
13