Checking And Correcting The Current Reference (0) Position - Citizen E650 User Manual

Checking and correcting the current reference (0) position

If the time, date or chronograph hands do not indicate properly, the correct
reference (0) positions may not be set.
●  W hat is the reference
(0) position?
The base position for all
the hands to indicate the
24 hour
hand:
time and date (refer to
0 o'clock
the figure on the right).
position
If the time and date
indications are off from
the correct reference (0)
position, the watch will
not indicate the time
and date correctly.
46
Modes supporting
this function: [CHR]
Hour/minute/second hands:
Position of 0 hour, 0
minute, 0 second
Function hand:
30 minute position
of chronograph
Day:
Middle between
31st and 1st
Checking and correcting the current reference (0) position
1. Pull the crown out to position
2. Rotate the crown to align the mode
hand to CHR (chronograph) mode.
3. Pull the crown out to position
All hands and the date indicator move to indicate
the current reference (0) position set in memory.
0 1 2
• No operations are available while the
hands and date indicator are moving.
Reference
Mode
(0) position
hand
Return the crown to position
0
Correct
(You do not need to correct
the reference position.)
Correct the reference
Incorrect positions. (Proceed to the
step 4 on the next page.)
.
1
.
2
Next operation
to exit the check.
47