Checking The Time Signal Reception - Citizen Red Arrows AT8060-50E Manual

Notes on the time signal reception
◆ When signal reception is poor
High-tension electrical lines or other structures near your house may block the
path to the signal station. This may result in a poor environment for receiving the
time signal.
With reference to pages 36 to 38, search for a better place for reception.
Then, attempt to receive the time signal following the procedure on page 43.
• I f the window contains a wire netting in it, open the window or change the
location for better reception.
40

Checking the time signal reception

Check the result of the last signal reception.
1. Ensure that the crown is in position 0 .
2. Press and release the lower right button Ⓐ .
0 1 2
The chronograph 1/20 second hand indicates the
signal reception result.
• For details on the reception result, see the next page.
S
M
OK T
RX W
3. Press and release the lower right button Ⓐ to
NO T
F
S
Ⓐ
finish the check procedure.
• T he current time indication will resume
90
OK
80 20
RX
70 30
NO
60
automatically when leaving the watch for approx.
10 seconds.
You can not perform this operation when using
the chronograph.
41