Other Set: Unlock Time, Door 1, Door 2, Cctv Num - iCentral 4+ Video Intercom System Owner's Manual

OTHER SET: Unlock Time, Door 1, Door 2, CCTV Num

UNLOCK TIME, for Door Unlock function, can be preset from 1 to 9 seconds.
Door 1 and Door 2 can be individually ENABLED or DISABLED
If you only install one doorbell, you will only need to activate Door 1. If you install 2
doorbells, you should enable both door 1 and door 2.
"CCTV NUM" indicates the number of surveillance cameras (max of 4) that are
connected to the system. If there are no cameras connected, set "CCTV NUM" as "00".
If you don't install any cameras and do not set this number to "00", the indoor monitors
will display a blue screen when you view any of the CCTV channels.
Programming Procedure:
From the main menu, press the "
"OTHER SET" option.
Click the "Next" button to enter the "Other Settings" sub menu as below:
UNLOCK TIME:
DOOR1 STATE:
DOOR2 STATE:
CCTV NUM:
Use the "Prev" or Next" button, to modify the parameters.
Press the " " button to move the cursor to the next option.
Menu/Set
Press the "OK" button to save and return to the main menu.
Press the "OK" button again to turn off the screen and exit.
" button to move the cursor to the
Menu/Set
OTHER SETTINGS
UNLOCK TIME
DOOR1 STATE
DOOR2 STATE
CCTV NUM
Lock release time (01 – 09 seconds)
Door 1 channel (ENABLE/ DISABLE)
Door 2 channel (ENABLE/DISABLE)
CCTV channels (00 – 04)
21
03
ENABLE
ENABLE
04
18