How To Monitor Video And Audio Inputs - iCentral 4+ Video Intercom System Owner's Manual

How to monitor Video and Audio Inputs?

There are six Audio/Video channels that can be viewed individually at any of the
indoor monitor units at any time.
The first two channels are Door-1 and Door-2 and provide both video and audio signals from
each of the doorbell units.
The next two channels are CCTV-1 and CCTV-2 which can be used for Audio, Video or both.
The next two channels are CCTV-3 and CCTV-4 which are purely for Video.
CCTV-1 to CCTV-4 can all be used for surveillance cameras however because
CCTV-1 and CCTV-2 include inputs for audio as well as video, these two inputs can
be used for television, background music or cameras equipped with microphones.
Note: Inputs for CCTV-1 are VD3 (Video) and AD3 (Audio)
Inputs for CCTV-2 are VD4 (Video) and AD4 (Audio)
Input for CCTV-3 is VD5 (Video)
Input for CCTV-4 is VD6 (Video)
1 Press the "Monitor" button, to see image and hear sound from Door-1.
2 Press the "Monitor" button again, to see image and hear sound from Door-2.
3 Press the "Monitor" button again, to see image and hear sound from CCTV-1.
4 Press the "Monitor" button again, to see image and hear sound from CCTV-2.
5 Press the "Monitor" button again, to see image from CCTV-3.
6 Press the "Monitor" button again, to see image from CCTV-4.
When Door-1 or Door-2 is being monitored, the image and sound will remain active at
the monitor unit for 30 seconds and then reset.
When CCTV 1, 2, 3 or 4 are being monitored, the image and sound (if applicable) will
remain until the function is turned off.
Note: If the chime is activated at one of the door units, while monitoring any of the
other Audio/Video channels, the screen will automatically change to the visitor's
doorbell channel.
The call can be answered as normal and when the call is terminated, the system will
automatically return to the previous channel being monitored.
23
20