Operating Your Breville Dual Burner - Breville Dual Burner BGR600 Instruction Booklet

OPERATING yOUR BREvILLE dUAL BURNER™

BEFORE FIRST USE
Before first use, remove and safely discard
any packaging material and promotional
labels and wipe the cooking plates with
hot soapy water, rinse and dry thoroughly
ensuring they are clean and free of dust.
Ensure the drip tray and splatter guard is
correctly inserted into the grill.
Place the grill on a flat, dry surface. Ensure
there is a minimum distance of 20cm of
space on both sides of the grill.
1. Unwind the power cord completely and
insert the power plug into a 230/240V
power outlet and turn the power 'On'.
White will illuminate around both
temperature control dials.
2. Allow grill to preheat. Turn temperature
control dials to LOW, MEDIUM or
HIGH Heat. The illumination around
the temperature control dials will
change to red during heating then turn
to white illumination when selected
temperature is reached. This should take
approximately 10 minutes.
3. During this time, prepare foods to
be cooked. Refer to grilling guide for
cooking times and recipes (page 13).
NOTE
One or both of the cooking plates can
be activated for grilling.
NOTE
When grill is turned on and heating
for the first time, it may emit a
fine smoke haze. This is due to
the protective substances on the
heating elements. It is safe and not
detrimental to the performance of the
grill. There is no need for concern.
4. Place food on either or both of the
cooking plates. Grilling times will
depend on food being cooked and
heat setting. The temperature controls
dials will turn red again as it maintains
selected temperature whilst cooking.
Refer to Hints and Tips for Grilling Meat
(page 12) and Recipes (page 18).
5. When food is cooked, remove from
cooking plates using heat proof or
wooden utensils.
NOTE
Never use metal tongs or a sharp knife
as these can cause damage to the
non-stick coating of cooking plates.
NOTE
Always allow grill to pre-heat to
selected temperature before grilling.
NOTE
The white illumination around the
heating control dials may turn red
during the cooking process. This is
indicating that the grill is maintaining
the correct selected temperature.
NOTE
The cooking and preheating cycle
can be stopped at any time by turning
the temperature control dials to
the 'STANDBY' position. White
illumination will appear around the
control dials. Allow the grill to cool
completely and disconnect from the
wall outlet.
9