Breville Dual Burner BGR600 Instruction Booklet page 18

CARE & CLEANING
Before cleaning, turn the power off at the
power outlet and then remove the power
plug. Allow your grill to cool before cleaning.
Remove the splatter guard and place into
dishwasher or wash in hot soapy water, rinse
and dry thoroughly. The grill is easier to
clean when slightly warm.
Use the scraper tool provided to remove
stubborn food residue between grooves of
grill ribbed plate. Use paper towel to remove
excess food before washing cooking plates.
Always clean your grill after each use to
prevent a build up of baked-on foods.
For baked on food residue squeeze some
warm water mixed with detergent or lemon
juice over the food residue then clean with a
non abrasive plastic scouring pad.
TIP
If baked on food is not removed by
this method brush with a little oil or
melted butter allow to stand for 5
minutes then wipe with damp cloth.
NOTE
Do not place the grill and the drip tray
in the dishwasher.
Splatter guard and scraper tool may
be placed in dishwasher.
CLEANING THE dRIP TRAy
Remove and empty the drip tray after each
use and wash the tray in warm, soapy water.
Avoid the use of scouring pads or harsh
detergents as they may damage the surface.
Rinse and dry thoroughly with a clean, soft
cloth and replace.
PREMIUM NON-STICK COATING
Cooking on a non-stick surface minimises
the need for oil, food does not stick and
cleaning is easier.
Any discolouration that may occur will only
detract from the appearance of the grill and
will not affect the cooking performance.
When cleaning the non-stick coating, do not
use metal (or other abrasive) scourers. Wash
with warm soapy water. Remove stubborn
residue with a non abrasive plastic scouring
pad or nylon washing brush.
WARNING
Do not immerse any part of the Breville
grill in water or any other liquid.
WARNING
Do not use spray-on non-stick coatings
as this will affect the performance of the
non-stick surface on the cooking plates.
STORAGE
To store your Breville Dual Burner
1. Turn off the grill and unplug power cord
from the power outlet.
2. Allow the grill to fully cool.
3. Click the removable drip tray and
splatter guard into place.
4. Wrap the power cord in the cord storage
area on the rear side of the grill.
5. Store on a flat, dry level surface.
:
™
17