Carrier 59SP5A Installation, Start-Up, Operating And Service And Maintenance Instructions page 50

VENT PIPE ADAPTER WITH GASKET
INSTALLED ON FURNACE VENT
PIPE IS CUT FLUSH WITH TOP OF
ADAPTER.
VENT PIPE FLUSH WITH ADAPTER
CASING SIDE ATTACHMENT
COMBUSTION AIR PIPE
(NON-DIRECT VENT)
Fig. 43 - - Vent Pipe Flush with Adaptor
Point elbow down towards
back of furnace
12"
256.0 mm
TOP PLATE ATTACHMENT
COMBUSTION AIR PIPE
(NON-DIRECT VENT)
Fig. 44 - - Combustion Air Pipe Attachment
50
ALIGN NOTCHES IN VENT PIPE
COUPLING OVER STAND-OFF
ON ADAPTER. TORQUE LOWER
CLAMP 15 LB-IN. WHEN REMAINING
VENT PIPE IS INSTALLED, TORQUE
UPPER CLAMP TO 15 LB-IN.
VENT PIPE FLUSH SHOWING COUPLING
A11339
A11345