59SC2E
Up to 92.1% AFUE, Single-Stage, Multi 18-Speed
ECM, Condensing Gas Furnace
Representative drawing only. Some product models may vary.
The 59SC2E Multipoise Comfort
SEER-boosting year-round electrical efficiency when paired with a
compatible condensing unit. Energy efficiency is at the heart of this
furnace
with up to 92.1% AFUE gas
electrically-efficient fixed-speeds, constant torque (MCT) ECM blower
motor. Improved serviceability with the 3 digit status display and NFC
enabled board allowing setup via the service tech app. This gas furnace
also features 4-way multipoise installation flexibility, and is available in
nine model sizes. The 59SC2E can be vented for direct vent/two-pipe,
ventilated combustion air, or single-pipe applications. Units are design
certified in Canada, and are certified for mobile/manufactured home use.
WARNING
!
CARBON MONOXIDE POISONING AND FIRE
HAZARD
Failure to follow this warning could result in personal injury, death,
and/or property damage.
This furnace is not designed for use in recreation vehicles or outdoors.
This furnace is designed for use in manufactured (Mobile) homes when
an optional Mobile Home accessory kit is installed.
Failure to follow this warning could result in personal injury, death,
and/or property damage.
Product Data
™
92 Condensing Gas Furnace features
efficiency
PERFORMANCE
• Multi 18-speed, constant torque (MCT) ECM blower motor for
electrically efficient operation all year long in heating, cooling and
continuous fan operation.
• Single-speed inducer motor, and single-stage gas valve.
• Silicon Nitride PowerHeat
• Adjustable blower speed for heating and cooling.
• Enhanced diagnostics with easy to read 3 digit display for faults and
status
• Aluminized-steel primary heat exchanger.
• Stainless-steel condensing secondary heat exchanger.
INSTALLATION FLEXIBILITY
• 4-way multipoise design for upflow, downflow or horizontal
installation, with unique vent elbow for 12 different venting options,
including optional venting through-the-cabinet downflow venting
capability.
• On-board NFC antenna makes setup a tap away when using the
Carrier service technician app
• Factory-configured ready for upflow applications.
• Ideal height 35" (889 mm) cabinet: short enough for taller coils, but
still allows enough room for service.
• Direct-vent/sealed combustion, single-pipe venting or ventilated
A11263
combustion air.
APPLICATIONS
• Approved for Twinning applications with accessory kit (060M17--14,
and
the
080M17--16, 080M21--20, 100M21--20, 120M24--20 models, only).
• Approved for Manufactured Housing/Mobile Home applications with
MH accessory kit.
• Convertible to propane with gas conversion accessory kit.
CERTIFICATIONS
• All sizes meet ENERGY STAR
• Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air
leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with
ASHRAE standard 193.
• All sizes can be installed in California air quality management
districts with a 40 ng/J NOx emissions limit.
™
Robust Hot Surface Igniter.
®
South regional standards.
A200351