Safety Instructions; Accessories Shipped Together With The Machine; Installation Instructions - PROEL PLSC575ECN User Manual

SAFETY INSTRUCTIONS

• Inquiry a qualified maintainer before you maintain the product.
• Make sure the light power off before you install the lamp or move the equipment.
• Don't use the different power voltage or different kinds of lamp.
• During use this light, it may generate high temperature to cause danger. Please
don't put any inflammable or explosive material near the equipment, don't touch
the light directly by hand.
• Make sure the distance of the equipment and is over 1 meter
• Don't look at the lamp directly to avoid eyes injury

ACCESSORIES SHIPPED TOGETHER WITH THE MACHINE

• Scoopscan 575ECN (1 pc)
• XLR cable (1 pc)
• User manual (1 pc)
• Fasten knob, washer for fly ring 2 set

INSTALLATION INSTRUCTIONS

• This product is fit to be used indoors, its ambient operating temperature lower
than 35°C.
• People assigned to install, operate and maintain the product must familiarize
themselves with the performance of the light fixture before they begin the
operations. Most damages result from incorrect operations arising out of
unfamiliarity with the performance of the product.
• Before the product begins to be used for the first time, please open the package
to check if there are any damages caused during transportation
• Before replace the lamp, please make sure the power have been cut off, and
wait until the light cool down (the temperature of the lamp can reach 200°C or
more).
Avoid Current-Passing High Temperature Lamp
9
130