BLADEZ SR3i Owner's Manual page 19

STEP 7
1) Mate Cable Connector (upper) (B-2)
and Heart rate cable (upper) (B-3) to
the back of the
Computer (A-1).
2) Install the Computer (A-1) to the
computer bracket which is welded on
the top of the handlebar post. Secure
the computer with 4 screws (A-2).
3) While seated, lift the seat adjustment
bar located under the right side
of the seat. Using your legs, slide
the seat forward or backward until
in the correct position. Once the
correct position is set, release the seat
adjustment bar to lock the seat in place.
MOVING THE MACHINE
To move the machine to a new location, tilt the bike forward and roll the machine on the transport wheels.
19