BLADEZ SR3i Owner's Manual page 14

STEP 2
1) Remove the pre-installed Cover for handlebar post (R-2) and slide it through post (B-1).
2) Connect the Heart rate cable (upper) (B-3) to the Heart rate cable (lower) (E-11)
3) Connect the Cable wire (upper) (B-2) to the Cable wire (lower) (E-17).
4) Tuck the excess cable lengths into frame tubing and slide the Handlebar post (B-1) down on to the main
frame. Align the mounting holes and secure the post in place by using the previously installed 4 Screws (B-4)
and 4 curved washers (B-5)
14