Remote Control Configuration - Clifford Responder LE 3.3X Installation Manual

You can advance from one function step to another by releasing the Valet/Pro-
gram switch and tapping it to advance function steps and then HOLDING it.
Learn Routine is exited if:
■ The door is closed
■ The ignition is turned off
■ The program switch is pressed too many times
■ More than 30 seconds elapses between steps

Remote control configuration

Responder LE 2-way
Note: The one-way remote only has the transmit LED and will not give any con-
firmation tones.

© 2008 Directed Electronics—all rights reserved