Remote start auxiliary output, 5-pin
1
PINK/WHITE
2
ORANGE
3
VIOLET
4
PINK
5
BLUE
Note: Wires 1 - 4 on the remote auxiliary outputs are wired to the (-) triggers for
the onboard remote start relays and are not diode isolated. If wiring these wires
directly to the vehicle you must place a 1-amp diode in line to prevent feedback
from the vehicle.
© 2008 Directed Electronics—all rights reserved
(-) 200mA FLEX RELAY CONTROL OUTPUT
(-) 200mA ACCESSORY OUTPUT
(-) 200mA STARTER OUTPUT
(-) 200mA IGNITION 1 OUTPUT
(-) 200mA STATUS OUTPUT
23