Table of Contents
Advertisement
Remote Control Configuration
The Responder LE and 1-way companion remote controls have op-
erations that can be configured to a user's personal preferences. The
following instruction directs you through the available programming
options for both remote controls.
Remote Features
To Enter Programming:
Press and hold the
1.
LED turns on, then release the
Within 30 seconds press and hold the
2.
onds until the transmit LED flashes then comes on solid, then re-
lease the
3.
The remote is now ready for configuration. Press the buttons indi-
cated in the tables below to set the desired feature options.
To save the changes once the remote has been configured press
4.
AUX
button once, and then press and hold again, the transmit
the
LED will shut off to confirm exiting.
2-way Responder LE Remote Control
The confirmation LED's next to the button indicate the feature settings.
Feature
Keypad Lock
Remote Beeps
Car 2
Page Mode*
© 2016 Directed. All rights reserved.
button for eight seconds until the transmit
button.
AUX
AUX
Button
LED ON
Press
Auto
Beeps ON*
AUX
AUX
Car 2 ON
AUX
AUX
AUX
AUX
Paging ON
AUX
AUX
button.
LED OFF
OFF*
Beeps OFF
Car 2 OFF*
AUX
Paging OFF
button for two sec-
AUX
AUX
LED Flash
LED Double
Flash
Triggers
Only
Power
Power
Save 1
Save 2
19
Advertisement
Table of Contents
