Types 8198 And 8199 - IBM ThinkCentre 2296 Hardware Maintenance Manual

3. Position the cover over the chassis and pivot it down over the computer until it
4. Reconnect the external cables and power cords to the computer.
5. To update the configuration, see Chapter 5, "IBM Setup Utility program," on

Types 8198 and 8199

After replacing FRUs, you need to install any removed parts, replace the cover, and
reconnect any cables, including telephone lines and power cords. Also, depending
on the FRU that is replaced, you might need to confirm the updated information in
the IBM Setup Utility program.
To replace the cover and connect cables to the computer:
1. Ensure that all components have been reassembled correctly and that no tools
2. Clear any cables that might impede the replacement of the cover.
66
Hardware Maintenance Manual
snaps into place.
page 21.
or loose screws are left inside the computer.