10. Replace the support bar and pivot the two drive bays back to their original
11. Go to "Replacing the cover and connecting the cables" on page 64.
Replacing internal drives
This section provides information and instructions for replacing internal drives.
v Hard disk drives
v CD drives or DVD drives
v Removable media drives
Note: These different drives are also referred to as integrated drive electronics
Internal drives are installed in bays. In this book, the bays are referred to as bay 1,
bay 2, and so on.
When you install an internal drive, it is important to note what type and size of
drive that you can install in each bay. Also, it is important to correctly connect the
internal drive cables to the installed drive.
8. Install the adapter-slot-cover latch.
9. Clear any cables that might impede the replacement of the drive bays.
positions.
(IDE) drives.
Chapter 6. Replacing FRUs
45