Types 8198 and 8199
These computers have three expansion slots for PCI adapters and one slot used for
an AGP adapter. You can install an adapter up to 228 mm (9 inches) long.
1. Remove the cover. See "Removing the cover" on page 32.
2. Remove the adapter being replaced.
3. Remove the new adapter from its static-protective package.
4. Install the adapter into the appropriate slot on the system board.
5. Install the adapter-slot-cover latch.
6. Go to "Replacing the cover and connecting the cables" on page 64.
Type 8316
This computer has three expansion slots for PCI adapters and one slot used for an
AGP adapter. Adapters must be low profile. The computer supports adapters up to
168 mm (6.6 inches) long.
1. Remove the cover. See "Removing the cover" on page 32.
Chapter 6. Replacing FRUs
43