Speaker Accessories - RBH Sound IN-CEILING SPEAKERS Installation And Instruction Manual

Speaker Accessories

Back Cans
Back Cans (BC's) attach neatly and directly
to the back of in-ceiling speakers to
prevent sound from being transferred into
adjacent floors or rooms. Back cans on
in-ceiling speakers are needed to meet
building code requirements in select areas.
All RBH Sound back cans are UL rated.
Blank Plates
Back Cans
Blank plates are a very clean and efficient
way to cover the holes left in drywall when
a new construction bracket is used or a
speaker is removed. Install blank plates
when in-wall/in-ceiling speakers will not be
immediately installed after drywall is finished.
Short Back Can
New Construction Brackets
An excellent way to guarantee placement of
in-wall and in-ceiling speakers prior to drywall
installation, New Construction Brackets
(NCB's) also make installation of in-wall
and in-ceiling speakers faster and easier
by reducing time and mess. Once drywall is
installed, just connect the speaker to the
speaker wire and install. New Construction
Blank Plates
Brackets eliminate the time and need to locate
and cut drywall before speaker installation.
For more information on RBH Sound in-ceiling
speaker accessories go to www.rbhsound.com.
New Construction Bracket
5