Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notices, Cautions, Dangers and Warnings.
FRONT SUSPENSION
11
12
*NOTE: Tie Rod Not
Shown for
Clarity
Front Shock Absorber Replacement
Tool List
Wrench, 9/16".............................................................. 1
Remove the nut (1) from the bottom of the shock
absorber (2) at the front axle (3) (Ref. Fig. 6 on Page F-
5).
Compress shock absorber to clear the mounting
bracket.
5
4
7
1
9
21
23
24
8
10
6
20
Fig. 6 Front Suspension Components
Qty. Required
Repair and Service Manual
FRONT SUSPENSION AND STEERING
2
Part of
Frame
15
16
19
14
22
24
13
18
18
Loosen the nut securing the top of the shock absorber to
the vehicle frame and then rotate the shock absorber
while holding the nut in place with a wrench.
Remove the shock absorber.
Installation of shock absorber is reverse of disassembly.
Mounting nuts should be tightened until rubber bushings
(4) expand to diameter of shock absorber washers (5).
3
29
25
Part of
Frame
28
27
26
17
Page F-5