WHEELS AND TIRES
Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notices, Cautions, Dangers and Warnings.
NOTICE
It is important to follow the 'cross sequence' pattern when
installing lug nuts. This will assure even seating of the wheel
against the hub.
With the valve stem to the outside, mount the wheel onto
the hub with lug nuts. Finger tighten lug nuts in a 'cross
Page D-2
sequence' pattern (Ref. Fig. 1 on Page D-2). Then,
tighten lug nuts to 50 - 85 ft. lbs. (70 - 115 Nm) torque in
20 ft. lbs. (30 Nm) increments following the same 'cross
sequence' pattern.
Tire style may vary
'CROSS SEQUENCE'
1
4
Fig. 1 Wheels and Tires
Repair and Service Manual
Valve stem is always
to outside of wheel
Always replace dust cap
3
2