Functional Description; Functional Parts; Intended Purpose - FLORABEST FGH 709 Operation And Safety Notes

plugging it from the mains.
• Make sure that the mains voltage match-
es the data on the tool's rating label.
• If possible, connect the tool to a socket
with a residual-current (RC) trip switch at a
triggering current of not more than 30 mA.
• Avoid skin contact with earthed objects
such as metal fences and posts.
• Make sure that the connector on the ex-
tension cable is protected from splash
water, and is made of rubber or has a rub-
ber covering. Only use extension cables
that are intended for outdoor use and are
labelled as such. Use extension cables
with a cable core diameter of at least one
square millimetre. Always completely un-
wind the cable reel before use. Check the
cable for damage.
• Use the cable hanger fi tted for the pur-
pose when using an extension cable.
• Do not carry the tool by the cable. Do not
unplug the cable by tugging on it. Keep
the cable away from heat, oil and sharp
edges.

Functional description

Your hand-operated garden tiller is equipped
with a maintenance free electric motor and a
gearbox with sump lubrication.
The tool is fi tted with four rotating tine wheels
that automatically dig themselves into the
ground.
The aluminium frame can be folded to aid
storage.
Please refer to the following descriptions for
the function of the controls.
The major functional parts are
shown on the foldout page.

Functional parts

1a Right-hand fork grip with dead-man
A
lever, safety release catch and cable
tension relief
1b Left-hand fork grip
2 Mains cable
3 Plastic cross-plate
4 Wing-nuts and bolts for securing the
grips
5 Frame tubing
6a Large cable clip
6b Small cable clip
7 Vent
8 Motor housing
9 Gearbox
10 Driveshaft
11 Tines
12 Belt clip

Intended purpose

The tool is intended for breaking up and tilling
coarse soil for the purpose of mixing in ferti-
liser, peat and compost in domestic areas.
Any use other than that specifi cally named in
this manual may lead to damage to the tool
and represents a serious injury hazard for the
operator.
The operator or user of the tool is responsible
for any damage or injury caused to other per-
sons or property.
This tool is intended for use by adults. Chil-
dren and persons unfamiliar with the manual
must not be allowed to use the tool. Do not
use the tool in rain or damp surroundings.
The manufacturer shall not be held liable for
damage arising from improper use or incor-
rect operation of the tool.
GB IE CY
7