Page 2
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. GB / IE / CY Operation and Safety Notes Page...
User manual Safety notes This section deals with the basic safety regu- FGH 700/9 Electric Tiller lations while working with the electric tiller. Contents Symbols Safety notes ..........4 Symbols on the tool Symbols ............ 4 General safety notes ......... 5 Warning! Read the user manual Functional description ........
footwear with non-slip soles and strong Symbols in the manual long trousers. Do not use the tool barefoot or wearing open-toed sandals. Warning symbols with information • To prevent injury from the tines, only on damage and injury prevention. switch the tool on in its working position. Instruction symbols (the instruction is •...
Page 6
If working on a slope, work along the the mains under the following circum- slope, not upwards or downwards. Be stances: particularly careful when changing direc- - Always before leaving the tool. tion on the slope. Do not use the tool on - Before removing remnants of soil and excessively steep slopes.
Functional parts plugging it from the mains. • Make sure that the mains voltage match- es the data on the tool’s rating label. 1a Right-hand fork grip with dead-man • If possible, connect the tool to a socket lever, safety release catch and cable with a residual-current (RC) trip switch at a tension relief triggering current of not more than 30 mA.
Assembly instructions Operation Always disconnect the tool from the Observe noise-abatement laws and lo- mains before conducting any work on it. cal by-laws. Scope of delivery Switching on and off Carefully remove the tool from the packaging Note: Before switching the tool on, and check that the following parts are com- make sure that the tool is not touch- plete:...
Wear protective gloves when carrying To avoid damage to the tool: • Never lift or drag the tool with the mo- out maintenance and cleaning work on tor running. the tool to avoid injury from cuts. • Lift the tool while moving it over hard surfaces such as tiles or steps.
Guarantee 3. Slide the tine-wheel pair off the shaft (10). 4. Clean the driveshaft with biological • This tool is subject to a guarantee period oil. of thirty-six months. A shorter guarantee 5. Slide the new tines onto the drive- period of 12 months shall apply for com- shaft with the holes on the axles mercially used and replacement tools ac-...
Replacement parts Technical specifi cations Use the service address or fax number sup- FGH 700/9 Electric Tiller plied to order replacement parts. Make sure Motor power input .........710 W you include the order number in your order. Mains voltage ........230V AC Mains frequency ........50 Hz Set of tines Working width ........
EU declaration of conformity We hereby confi rm that the FGH 700/9 series electric tiller conforms with the following applicable relevant version of the EU guidelines as of model year 2008: 98/37/EC • 2004/108/EC • 2006/95/EC • 2000/14EC In order to guarantee consistency, the following harmonised standards as well as national standards and stipulations have been applied: EN 709/A1:1999 •...
Need help?
Do you have a question about the FGH 709 and is the answer not in the manual?
Questions and answers