1. Dynamic Routing: Routing Information Protocol (RIP) will exchange information about
destinations for computing routes throughout the network. Please select RIPv2 only if
you have different subnet in your network. Otherwise, please select RIPv1 if you need
this protocol.
2. Static Routing: For static routing, you can specify up to 8 routing rules. You can enter
the destination IP address, subnet mask, gateway, and hop for each routing rule,
and then enable or disable the rule by checking or un-checking the Enable checkbox.
Click on "Save" to store your settings or click "Undo" to give up the changes.
3.4.6 System Time
1. Time Zone: Select a time zone where this device locates.
2. Auto-Synchronization: Check the "Enable" checkbox to enable this function. Besides,
you can select a NTP time server to consult UTC time.
3. Sync with Time Server: Click on the button if you want to set Date and Time by NTP
Protocol manually.
4. Sync with my PC: Click on the button if you want to set Date and Time using PC's Date
and Time manually.
.
Click on "Save" to store your settings or click "Undo" to give up the changes.
AirLive Air3GII User's Manual
55
3.Installation/Un-installation