Table of Contents
Advertisement
L2TP Account and Password: The account and password your ISP assigned to you. If
5.
you don't want to change the password, keep it blank.
Connection ID: Optional. Input the connection ID if your ISP requires it.
6.
Maximum Idle Time: The time of no activity to disconnect your L2TP session. Set it to
7.
zero or enable "Auto-reconnect" to disable this feature. If Auto-reconnect is enabled,
this device will connect with ISP automatically, after system is restarted or connection is
dropped.
Connection Control: There are 3 modes to select:
8.
Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the
connect-button in the Status-page.
Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The default
9.
MTU value is 0 (auto).
3.1.2. DHCP Server
AirLive Air3GII User's Manual
28
3.Installation/Un-installation
Advertisement
Table of Contents
