Table of Contents
Advertisement
For 3G WAN Networking. The WAN fields may not be necessary for your connection. The
information on this page will only be used when your service provider requires you to enter
a User Name and Password to connect with the 3G network.
Please refer to your documentation or service provider for additional information.
Dial-Up Profile: Select "Auto-Detection" or "Manual" to continue. If "Auto-Detection" is
1.
selected, the device will try to configure some ISP specific dial-up parameters
automatically according to the Country, Telecom, and 3G Network information you
entered..
Country: Select your country.
2.
Telecom: Select your telecom.
3.
3G Network: Select the 3G Network
4.
APN: Enter the APN for your PC card here.(Optional)
5.
Pin Code: Enter the Pin Code for your SIM card. (Optional)
6.
Dial-Number: This field should not be altered except when required by your service
7.
provider.
Account: Enter the new User Name for your PC card here, you can contact to your ISP
8.
to get it. (Optional)
Password: Enter the new Password for your PC card here, you can contact to your ISP
9.
to get it. (Optional)
Authentication: Choose your authentication.
10.
Primary DNS: This feature allows you to assign a Primary DNS Server, contact to your
11.
ISP to get it. (Optional)
Secondary DNS: This feature allows you to assign a Secondary DNS Server, you can
12.
contact to your ISP to get it. (Optional)
Connection Control: Select your connection control. There are 3 modes to select:
13.
Connect-on-demand: The device will link up with ISP when the clients send outgoing
packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually:
The device will not make the link until someone clicks the
connect-button in the Status-page.
AirLive Air3GII User's Manual
20
3.Installation/Un-installation
Advertisement
Table of Contents
