Unpacking - Baxi 910 Installer And Owner Manual

The gross calorific value of the fuel has been used for this efficiency calculation. The
test data from which it has been calculated has been certified by Advantica
Certification services (0087). The efficiency value may be used in the UK
Government's Standard Assessment Procedure (SAP) for energy rating of dwellings.
The conversion of net efficiency to gross was achieved by multiplying the net
efficiency by the following conversion factor from Table E3 of SAP 2005, rounding
down to the nearest whole number.
Gas
Natural Gas
LPG
Before installation, check that the following components, where required, have been
delivered.
Box 1 - Contains the following loose parts:
4 feet.
1 Lower casting cover.
4 Threaded studs ((For feet / lower casting cover).
4 securing nuts (For feet / lower casting cover).
4 flat washers (For feet / lower casting cover).
4 locking washers (For feet / lower casting cover).
2 wall plugs (For securing feet to floor).
2 wood screws (For securing feet to floor).
1 Small nut and bolt (For vent switch).
2 bolts with washers (For the diverter box).
3 self tapping screws (For burner).
1 Flue spigot.
1 Flue restrictor.
2 small machine screws (For flue spigot and flue restrictor).
Box 2 - Ceramic fuel effect.
Stove body
The stove is supplied with a locked door. Using a suitable sized spanner, turn the
locking bolt on the front of the door in a counter clockwise direction. Carefully remove
and unpack the contents of the stove.
©
Baxi Heating U.K. Limited 2010.
INSTALLER GUIDE
Conversion factor from net to gross efficiency

3. UNPACKING

Page 7
0.901
0.921