Burner Module; Thermal Switch; Diverter Box - Baxi 910 Installer And Owner Manual

Thermal switch.

The Thermal Switch should be fitted to the inside of the Diverter Box as in
figure 4. Secure using the nut and bolt supplied. Never modify the fixing bracket and
always ensure that the switch is fitted correctly. NEVER USE THE STOVE IF THE
THERMAL SAFETY SWITCH HAS BEEN REMOVED OR IF IT IS DAMAGED IN ANY
WAY.

Diverter box.

Locate the diverter box to the rear of the stove body and secure in place using the
bolts and washers supplied.

Burner module.

Offer the burner module into the stove
and connect the thermal switch leads to the
tags mid way along the thermocouple.
Locate the burner assembly inside the
stove body as in figure 5 (The outer front of
the stove is not shown for clarity). The rear
leg of the burner should sit on the rear of
the casting. Secure using the three screws
supplied. The screw locations are shown ion
figure 5).
Secure the control knob assembly to the
gas valve, the screw tail should secure onto
the flat on the gas valve spindle.
©
Baxi Heating U.K. Limited 2010.
INSTALLER GUIDE
Figure 4.
Page 10
Figure 5.