Table of Contents
Advertisement
Clock Set
Turn on the TV and select the VIDEO channel (or AV mode).
1
2
1
2
Just Clock
The J ust Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The J ust Clock option can be set "ON" or "OFF" at the
Clock Set screen (the default setting is "ON"). Press O K
until the J ust Clock setting begins blinking, then press %fi
to change the setting.
IM PO RTAN T: If you turn the J ust Clock function off, the
accuracy of your recorder's built-in clock may be im-
paired, which could adversely affect timer recording.
N O TES:
● J ust Clock (when set to "ON") adjusts the recorder's built-in
clock every hour, except for 23:00, 0:00, 1:00 and 2:00.
● J ust Clock is not effective when . . .
– the recorder's power is on.
– the recorder is in the Timer mode.
– a difference of more than 3 minutes exists between the
built-in clock's time and the actual time.
– the recorder is in the Auto Satellite Prog Rec mode (
30).
● If J ust Clock is set to "ON", the recorder's clock is automati-
cally adjusted at the start/end of Summer Time.
● J ust Clock may not function properly in poor reception
conditions.
Downloaded from:
https://www.usersmanualguide.com/
– –:– –
1
2
3
4
5
6
7
8
9
3
4
0
4
3
M EN U
IM PO RTAN T
If you performed Auto Set Up (
(
pg. 9) or Auto Channel Set (
having set the clock previously, the recorder's built-in
clock is also set automatically.
Perform the following steps only if —
— Auto Clock Set has not been performed correctly by
Auto Set Up, Preset Download or Auto Channel Set.
— the recorder's memory backup has expired.
— you want to change J ust Clock setting (
the left column).
TURN THE RECO RDER O N
1
Press
ACCESS MAIN MEN U SCREEN
2
Press M EN U .
ACCESS IN ITIAL SET SCREEN
3
Move the highlight bar (pointer) to "INITIAL SET" by
pressing %fi , then press O K or
O K
ACCESS CLO CK SET SCREEN
4
Move the highlight bar (pointer) to "CLOCK SET" by
pressing %fi , then press O K or
appears.
[5 ∞ ] =
[MENU] : EXIT
SET DATE AN D TIME
5
Press %fi to set the time, then press O K or
display begins blinking. Repeat the same procedure to
set the date and year.
● When you set the time, press and hold %fi to
● When you set the date, press and hold %fi to
SET JUST CLO CK
6
The default setting is " ON" . Set as desired by pressing
%fi , then press
● For the J ust clock function,
● If you set to " OFF" , you can disregard the next step as
SET CLO CK DAT A SO URCE PRESET
7
The recorder is preset to receive clock setting and
adjustment data from preset position 1. Press %fi to set
the preset position to the number representing the
station transmitting clock setting data (BBC1, BBC2,
etc.), then press O K or
pg.
ST ART CLO CK O PERATIO N
8
Press M EN U .
pg. 8), Preset Download
pg. 54), without ever
or
or
.
INITIAL SET
CLOCK SET
GUIDE PROG SET
JLIP ID NO. SET
[5∞] =
[MENU] : EXIT
change the time by 30 minutes.
change the date by 15 days.
O K or
.
#
you won't be able to receive regular clock adjustments.
.
#
61
"J ust Clock" in
#
.
. The Clock Set screen
#
CLOCK SET
TIME
DATE
YEAR
0: 00
01 . 01
99
JUST CLOCK: ON
TV PR.
: 1
#
. The "date"
"J ust Clock" on the left.
Advertisement
Table of Contents
