4 Replacement Procedures
4.17 Back cover
Removing the Back cover
The following describes the procedure for removing the back cover (See Figure 4-35).
1. Remove the following screws securing the back cover.
•
M2.5×6B
2. Remove the back cover while releasing the latches.
M2.5x6B FLAT HEAD
4-54
[CONFIDENTIAL]
FLAT HEAD screw
M2.5x6B FLAT HEAD
Guide
Figure 4-35 Removing the back cover
×4
Back cover
QOSMIO G50 Maintenance Manual (960-683)
4.17 Back cover