IBM TotalStorage 201 User Reference Manual page 92

Table 13. Supplementary CD directories (continued)
Directory Name
Services for UNIX
Terminal Services Client
readme.txt
80
NAS 200 User's Reference
Contents
SFU 2.2 installation files, zipped into a self-extracting executable, sfu22.exe. If you add
features that are not preloaded, you will be prompted for these installation files. You will
need to extract the installation files onto the hard disk drive of your NAS 200. It is
recommended that you use the maintenance drive (D: drive) as the destination, but you
can use the system drive (C: drive). On whatever drive you choose, make sure that
you have at least 250 MB of free space available, create a temporary directory on the
drive, and then issue the following command from the Services for UNIX directory on
the Supplementary CD: sfu22 path, where path is the drive letter and path of the
temporary directory you created. Then when you are prompted by the Services for
UNIX installation to provide the path of the installation files, specify the same path you
specified in extracting the files from the CD.
The standalone Win32 Terminal Services Client application. The NAS 200 appliance
supports Web-based terminal services, so this is an optional installation. To install the
Terminal Services Client, run setup.exe from the Disk1 subdirectory.
This is a text file that describes the contents of the Supplementary CD.